Initial Operation; Overheating Protection; Technical Data - Clatronic KH 3077 N Manual De Instrucciones

Installation of the Feet
Please note illustration 1, which shows the underside of the
appliance.
• Attach the two feet with the four 15 mm screws.
WARNING:
Only the 15 mm-long screws supplied should be used.
Damage the appliance or represent a hazard to the user
or others.

Initial Operation

• Make sure that the degree of protection of the socket to
which the appliance is connected is of at least 10 am-
pere!
• Place the appliance on any heat-resistant flat surface.
Ensure that air can enter and leave unhindered.
• The distance from the air outlet grille to the nearest wall
should be at least 1 m.
• Only connect the appliance to a properly installed safety
socket.
Function Switch
The heating power is determined by the various levels. The
appliance offers 3 heating levels for ideal comfort:
Tilt the function switch I or II. The control lamp in the switch
lights up (see illustration 2).
Function switch I alone is on = 750 W
Function switch II alone is on = 1250 W
Function switches I + II are on = 2000 W
The control lamp lights up when the appliance is heating
up.
Thermostat
You can set the room temperature with the temperature
control.
Lowest level
Controlling Room Temperature
1. Turn the thermostat control knob to the highest level. The
LED will light up.
2. Once the desired room temperature is reached, turn the
thermostat control knob slowly back until the appliance
shuts off (control lamp goes off).
NOTE:
The thermostat maintains the set room temperature by
switching the appliance on and off.
KH3077N_IM
Switching Off
1. Turn the thermostat to MIN and move the function
switches to the off position in order to turn the appliance
off.
2. Remove the plug from the socket after use.
• The appliance is equipped with an overheating protection
that switches the appliance automatically off in case of
overheating.
- Tilt the function switch to "0" position and pull out plug
out of the socket. Let the appliance cool down for
about 10 minutes before using it again.
• Is the appliance overheating?
- Check whether the air intake or outlet of the heater is
blocked. If so, the blockage should be removed.
• Should the overheating protection shut the appliance off
again shortly after, there is probably a defect.
- Switch off the appliance again and pull out the plug.
- Have the appliance checked by the dealer or by our
service.
WARNING:
• Before cleaning, always remove the mains plug and
wait until the appliance has cooled down.
• Do not immerse the appliance in water. Otherwise this
might result in an electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• Wipe off the dust on the appliance with a dry cloth.
• A damp cloth (not wet) may be used for the removal of
stains.
Model:....................................................................KH 3077 N
Highest level
Power supply:....................................... 220 V – 240 V~, 50 Hz
Power consumption: ........................................1800 – 2000 W
Protection class: .....................................................................
Net weight: ....................................................... approx. 2.5 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This appliance has been tested according to all relevant
current CE guidelines, such as electromagnetic compatibil-
ity and low voltage directives, and has been constructed in
accordance with the latest regulations.

Overheating Protection

Cleaning

Technical Data

30.05.18
33