Storage Recommendations - DeWalt DC745 Manual De Instrucciones

sPECIFIC sAFETy INsTRuCTIoNs FoR lITHIuM IoN
(lI-IoN)
• Do not incinerate the battery pack even if it is severely
damaged or is completely worn out. The battery pack can
explode in a fire. Toxic fumes and materials are created when
lithium ion battery packs are burned.
• If battery contents come into contact with the skin,
immediately wash area with mild soap and water. If battery
liquid gets into the eye, rinse water over the open eye for
15 minutes or until irritation ceases. If medical attention is
needed, the battery electrolyte is composed of a mixture of
liquid organic carbonates and lithium salts.
• Contents of opened battery cells may cause respiratory
irritation. Provide fresh air. If symptoms persists, seek medical
attention.
WARNING: Burn hazard. Battery liquid may be flammable if
exposed to spark or flame.
Battery cap (fig. 1)
A protective battery cap is supplied to cover the contacts of a
detached battery pack. Without the protective cap in place, loose
metal objects could short circuit the contacts, causing a fire hazard
and damaging the battery pack.
1. Take off the protective battery cap before
placing the battery pack in the charger or
tool.
2. Place the protective cap over the contacts
immediately after removing the battery pack
from the charger or tool.
WARNING: Make sure the protective battery cap is in place
before storing or carrying a detached battery pack.
Battery pack (fig. 2)
BATTERy TyPE
The DC745 operate on 12 volt battery packs.

Storage recommendations

1. The best storage place is one that is cool and dry away from
direct sunlight and excess heat or cold.
2. Long storage will not harm the battery pack or charger. Under
proper conditions, they can be stored for 5 years or more.
DEScrIPTIon (fIG. 2)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
INTENDED usE
These drills/drivers/hammerdrills are designed for professional
drilling and screwdriving applications.
Do NoT use under wet conditions or in presence of flammable
liquids or gases.
These drills/drivers/hammerdrills are professional power tools. Do
NoT let children come into contact with the tool. Supervision is
required when inexperienced operators use this tool.
A. Trigger switch
FIG. 1
B. Forward/reverse button
C. Torque adjustment collar
D. Gear selector
E. Worklight
F. Keyless chuck
G. Battery pack
H. Battery release buttons
6