Technical Data; Equipment Items; Safety Regulations; Introduction - Heiniger HANDY/M Manual De Instrucciones

1.3 Technical Data

Model Designation:
Mains Voltage:
Motor Output:
RPM:
Fuse Protection Needed:
Dimensions (W/H/L):
Weight, excluding cable:
Max. Ambient Temperature:
Max. Air Humidity:
Noise Emission (L
Acceleration (a

1.4 Equipment Items

1 Clipping Machine with Clipper Head, 1 Pair of Clipping Blades, 1 Special Screwdriver, 1 Bottle
of Special Lubricating Oil, 1 Cleaning Brush, 1 Set of Operating Instructions, 1 Transport and
Storage Case
Options:
• Various clipper blades

2 Safety Regulations

2.1 Introduction

This section describes the mandatory safety regulations which must be observed when using
the clipping machine.
All persons undertaking work on or with the machine have an obligation to read the opera-
ting instructions.
The operating instructions must be kept safely in the storage case and accessible at all
times.

2.2 Symbols and Warning Signs

Various symbols are used in the operating instructions. They refer to potential dangers or point
to technical information, the non-observance of which will lead to personal injury, damage to
objects or inefficient operation.
Danger Symbols
Warning
indicates a potentially dangerous situation. If preventive action is not taken, death or very seri-
ous injury could result.
Caution
indicates a potentially dangerous situation. If preventive action is not taken, the consequences
could be slight or minor injuries.
4
):
pAm
):
vhw
HC (Handy Clipper)
see rating plate
approx. 79 mm x 72 mm x 290 mm
1240 g
0°C - 40°C
10% - 90% (relative)
75 dB(A) (DIN-45635-1/04.84 + BG-PAS 26)
4,6 m/sec 2 (EN-28662-1/01.93)
Instruction manual HANDY