Connections, Operating And Display Elements - Cameo Q SPOT 40 Serie Manual De Usuario

FEATURES
Compact spotlight with a 40 W cool or warm white LED. DMX-512 control. Master/slave mode. Sound control. Control via IR remote control
(IR remote control optional) Fast access feature. Securing lug and mounting bracket. 2 diffusers included for various dispersion angles.
Housing colour black or white. Operating voltage 100-240 V AC / 50-60 Hz. Power consumption 55 W.
The spotlight features the RDM standard (Remote Device Management). Remote device management allows the user to view status and
configuration of RDM terminals via an RDM-capable controller.

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

1
POWER IN
Blue power input socket for power supply to the device. A suitable power cable is included.
2
POWER OUT
White power output socket for power supply to additional CAMEO spotlights. Ensure that the total current consumption of all connected
devices does not exceed the value specified on the device in amperes (A).
3
FUSE
Fuse holder. Fuse T1A/250 V (5 x 20 mm) IMPORTANT: Replace the fuse only with a fuse of the same type and value. In the event of repeated
fuse failure, please contact an authorised service centre.
4
DMX IN
Male 3-pin XLR socket for connection to a DMX control device (e.g. DMX console).
5
DMX OUT
Female 3-pin XLR socket for sending the DMX control signal.
6
OLED DISPLAY
The OLED display shows the operating mode and other system information.
4 5
1
3
6
7
8
2
5