Charging Battery Packs; Charging Time - Sony BC-U2 Instrucciones De Instalación

Charging Battery Packs

Charging time

The time to charge a completely exhausted battery pack to its full
capacity is shown below. (When the temperature is 25°C (77°F). The
charging time is not affected by whether one or two battery packs are
being charged, or by combinations of different battery models.)
BP-U30: approximately 130 minutes
BP-U60: approximately 150 minutes
BP-U90: approximately 190 minutes
Charging in CHARGE mode
You can charge two battery packs simultaneously (two batteries of
the same model or two batteries of different models).
BP-U30/U60/U90 lithium-ion battery packs
Mode select switch
CHARGE indicators
To AC power source
AC power cord
AC input
connector
1
Set the mode select switch to CHARGE.
2
Connect the AC power cord 1 to the AC input connector
and 2 to an AC power source.
3
Attach the battery packs.
Place the battery packs with the triangle marks facing the
charge connectors and slide them in the direction indicated by
the arrows.
Be sure to push the battery packs to engage the charge
connectors until they click.
Charging begins, and the CHARGE indicators show the
charging status.
Flashing in orange: Charged between 0 to 80%
Flashing in green: Charged over 80%
Lit in green: Fully charged
Note
The charging current is automatically blocked if a battery pack other
than a lithium-ion battery pack is attached. Be sure to charge
designated battery packs only.
17
Charging Battery Packs