Fcc Compliance - Bushnell ENRAGE Manual Del Propietário

2. Remove the windage and elevation adjustment caps.
3. With the scope mounted, rest the gun on a solid support. Sight along the barrel
and aim at a target 50 to 100 yards away. Sight through your AR Optics Red Dot
and use the windage and elevation adjustments to align the center dot with the
target as seen along the barrel. Each click of adjustment moves the point of impact
by the amount written on the adjustments. Once the scope is zeroed, replace the
adjustment caps.
4. For reference, the AR751305 and AR750132 sights both have 2 moa center dots.
The AR750132 also has a 25 moa circle around the center dot.

FCC COMPLIANCE

The Bushnell AR Optics red dot scope complies with Part 15b of the FCC Rules. Operation
is subject to the following conditions: (1) this device may not cause harmful interference
and (2) this device must accept any interference received, including interference that may
cause undesired operation.
6
r / 2
etiCle W moa Dot
Outer 25 moa circle
on AR750132 only