Velleman CCTVPROM10 Manual Del Usuario página 10

7.3.3 HDD
Displays essential information about the system`s internal hard drive, and lets you format the internal
HDD and external USB flash drive (not included).
The HDD menu displays the following:
• HDD STATUS: The system will display "OK" for normal operation
• SIZE: The size (in gigabytes) of the internal hard disk drive.
• FREE SPACE: The space (in gigabytes) remaining on HDD
• AVAILABLE TIME: The recording time (in hours) remaining on the HDD based on your current
record settings
• OVERWRITE: Select ENABLE or DISABLE. If overwrite is enabled, the system will record over the
oldest video data once the HDD is full. If overwrite is disabled, the system will stop recording once
the HDD is full and the live screen will show "H" symbol.
Formatting the Hard Drive
• Click on HDD FORMAT.
ATTENTION: Formatting the HDD will erase all video data. This step cannot be undone.
Formatting the USB Flash Drive
• Use a USB flash drive (not incl.) to backup recorded video and upgrade the systems firmware. You
should always format the USB flash drive you intend to use with the system.
NOTE: Not formatting the USB flash drive may result in improper functionality.
7.3.4 BASIC
Set the system language, date and time, passwords, and configure audio and display options.
The Basic Setup menu contains the following sub-menus: Language, Date/Time, Password, Display,
and Audio.
12/04/2011
CCTVPROM10
10
©Velleman nv