Velleman CCTVPROM10 Manual Del Usuario página 19

8. Remote surveillance software
The system features built-in browser-based software that allows you to access your system remotely over
your local area network (LAN) or over the Internet using Internet Explorer
NOTE: To ensure PC stability when browsing the DVR, recommended operating systems are Windows XP,
Windows Vista, Windows 7; recommended browsers are IE 6.0, IE 7.0, IE 8.0.
8.1 Connecting
With your system connected to your local area network, you can now log in to your system using Internet
Explorer.
NOTES:
• Your system must be connected to your local or wide area network before attempting remote access.
• You must configure DDNS settings locally.
To access your system:
1) Open Internet Explorer. In the address bar, enter the IP address (and port when different from 8080)
of your system (e.g. http:// 192.168.3.97:2563).
2) You must install ActiveX
main page and select Install ActiveX Control. DVR Net viewer will reset.
3) In the warning box click Install. The login page appears.
4) Leave the password field blank (default).
NOTE: If you have enabled passwords on your system, enter your USER or ADMIN password.
However, only the ADMIN can change settings and options on the system.
5) Select LAN or INTERNET from the drop-down menu and click LOGIN. The process will take about
1~2 minutes.
8.2 Remote surveillance main screen
Upon login, the Remote Surveillance main screen appears in your browser.
12/04/2011
CCTVPROM10
®
in order to access your system. Click the attention bar at the top of the
19
®
.
©Velleman nv