Velleman CCTVPROM10 Manual Del Usuario página 12

ATTENTION:
By default, passwords are disabled on the system. You will not need a password to log in or access
menus. You will not need a password to access your system using the browser-based remote
software.
You can change the Device ID and password of the ADMIN and the USER from the Password menu.
To open the Password/security menu:
1) Right-click anywhere onscreen to open the Sub-Menu and select MAIN MENU.
2) Click BASIC. The Basic Setup Menu opens.
3) Click PASSWORD. The Password/Security menu opens.
To change your Device ID and Password:
1) Click the field beside DEVICE ID and enter a 6-digit numerical Device ID using the Virtual
Keyboard (mouse only). For example, change the ID to 000010.
2) Under PASSWORD, select ENABLE.
3) Click the field beside USER PASSWORD to enter a 6-digit numerical password using the
Virtual Keyboard (mouse only). Re-enter the password in the corresponding field.
4) Click the field beside ADMIN PASSWORD to enter a 6-digit numerical password using the
Virtual Keyboard (mouse only). Re-enter the password in the corresponding field.
NOTE: The USER and ADMIN passwords must not be the same.
5) Click APPLY to save your changes. Click SURE in the confirmation window.
6) Click EXIT in each menu until all windows are closed.
Use your new password to log in to the system and access system menus. You can also use the USER
and ADMIN passwords to access your system using the browser-based remote software.
NETWORK PW CLEAN: select and click APPLY will initialize the IE browser password.
7.3.4.4 DISPLAY
Use the Display Setup menu to customize channel titles, show/hide the date and time in live viewing
and playback, and enable/disable preview channels.
To customize Display settings:
1) Configure the following options:
o NAME: click any of the fields and enter a new title for the selected channel using the Virtual
Keyboard (mouse only)
o POSITION: reposition the channel title; select TOPLEFT, BOTTOMLEFT, TOPRIGHT,
BOTTOMRIGHT or OFF. If OFF, the title will not be displayed for the selected channel
o COLOR: Adjust CHROMATICITY, LUMINOSITY, CONTRAST, and SATURATION for the
selected channel
o PREVIEW TIME: select ON/OFF to show/ hide the date and time during live viewing
o RECORD TIME: select ON/OFF to show/hide the date and time during playback.
2) Click NEXT PAGE to change the settings for the remaining channels (8-channel models only).
3) Click APPLY to save your settings. Click SURE in the confirmation window.
Preview
Preview channels can be very useful if your display monitor is in public view. Select OFF of a
preview channel will appear black on the display to give the impression that no cameras are
connected and the system is not recording.
12/04/2011
CCTVPROM10
12
©Velleman nv