Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
For example, if you want your schedule for Monday to be the same on Wednesday: under FROM
select MON, under TO select WED, and then click COPY.
7) Click SAVE.
8) Click EXIT in each menu until all windows are closed.
Example
You want your system to record continuously on all channels from 9 AM to 5 PM Monday to Friday. You
also want Alarm/Motion recording from 5 PM to 9 AM. You do not want the system to record Saturday
or Sunday.
To set the recording schedule:
1)
Open the Schedule menu.
2)
Under CHANNEL, select ALL.
3)
Click the blue MANUAL RECORD block below the grid. A checkmark will appear in the block.
4)
Under SUN, click blocks 00~23. The blocks will turn blue.
5)
Under FROM, select SUN. Under TO select SAT, and then click COPY.
6)
Click the red ALARM block below the grid.
7)
Under MON, click blocks 00~08 and blocks 18~23. The blocks will turn red.
8)
Click the green GENERAL block below the grid.
9)
Under MON, click blocks 09~17. The blocks will turn green.
10) Under FROM, select MON. Under TO select TUE, and then click COPY. Repeat for Wednesday,
Thursday, and Friday. Your completed schedule should the same as the image below:
11) Click SAVE. Click CLOSE in the confirmation window.
12) Click EXIT in all menus until all windows are closed.
Mask Field Setup
The Mask Field lets you block a specific portion of a channel you do not want recorded or shown on
the display screen. This can be useful if you need to conceal a sensitive area being captured by the
installed camera.
To use the mask field:
1)
From the Record menu, click MASK FIELD SETUP. The Mask Field menu opens.
2)
Choose a channel you wish to apply the Mask Field. Select ON from the SWITCH drop-down
menu.
3)
Click SETUP. The Mask Menu disappears and the select channel is shown in full-screen.
4)
Using the mouse, click and drag the cursor over the area you want to conceal. A single click will
produce a small black square.
5)
Right-click anywhere on the screen to return to the Mask Field menu.
6)
Click APPLY. Click SURE in the confirmation window.
7)
Click EXIT in all menus until all windows are closed.
12/04/2011
CCTVPROM10
9
©Velleman nv
Publicidad
Tabla de contenido
