EMAK efco FR 46 Manual De Instrucciones página 14

H
E
B
H
Figure 5 Assemble the pump and connect pipes
G G
Figure 4 Engaging the pump in the fan
E
Observing Figure 5:
 Connect the tube D (situated in
the upper part of the pump) to
the attack located in the lower
part of the tank. Fix the tube D
with the clamp.
 Assemble the pump by grafting
the slots in the rotor of the
pump, on the ribs of the hub of
the fan (as shown with G in
Figure 4).
D
 Screw the 3 screws B to fix the
pump to the machine.
 Connect the pipe E situated in
B B
the lower part of the pump,
with the liquid tank. Fix the
tube E with the blocking ring.
 Connect the pipe H (from the
top of the pump) to the handle
on the throwing pipe (where
before it was connected the
hose C).
14