Technical Characteristics - TRAPP ES-500 Manual De Instrucciones

Electric
ES-500
ES-550
Gasoline
Diesel
Electric
ES-600
ES-650
Gasoline
Diesel
Environmental conditions limits:
Note: 1) The machines come out from the factory without switch (on/off) and electric motor connection, being at the
customer's discretion connecting it in the desired voltage, as available in the region. The motor connection scheme is
made available in the motor itself, so that the customer may proceed with the connection.
Note: TRAPP makes no warranty for the motor being damaged due to reversed or wrong connection, as described in the manual.
To define the pulley to be used on the motor, proceed in the following matter:
diameter of pulley multiplied by shredder rotation and divided by the specified
44

Technical Characteristics

220/440
5 and 7,5 cv 1)
220/380
13.5 HP (Briggs
& Stratton) and
–
15 HP (TRAPP /
Lifan)
to
–
7 8 HP
220/440
7.5 and 10 cv
1)
220/380
13.5 to 16 HP
(Briggs & Stratton)
–
15 HP
(TRAPP / Lifan)
to
8 10 HP –
rotation on the motor plate.
Formula: Diameter of pulley x shredder rotation -> (chart above)
Example: If the motor is 4 poles (1,750 rpm)
200x1,600
1,750
Mono-
phase
Three-
phase
2
–
–
215
Mono-
phase
Three-
phase
3
–
–
Temperature: 40 °C
Air relative humidity: 80%
Motor rotation
= 320,000 = 182 mm (Motor pulley's diameter)
1,750
www.trapp.com.br
B-85 2 1,600 3
B-81 3 1,600 3
1,400 /
5,000
2,000 /
7,000