Hour Meter - American-Lincoln 56515851 Instrucciones De Uso

CONTROLS
BATTERY CONDITION METER
The battery condition meter (A) is located on the instrument panel as shown in fi gure 12. The condition meter indicates the level of charge in
the batteries. The batteries are suffi ciently charged when all of the LED's are illuminated amber as shown on the ramp illustration. Charge the
batteries when one red LED is illuminated on the left at the bottom of the ramp diagram and the scrub brushes stop. Do not operate the machine.

HOUR METER

The hour meter (B) is located on the instrument panel as shown in fi gure 13. Tthe diplay will show the total hours the machine has been in
operation. The meter is activated when the key switch is placed in the ignition position. The meter can be used to determine when maintenance
should be done on the machine.
FIGURE 12
FIGURE 13
NOTE
To reengage, the key must be returned to the "OFF" position.
ENGLISH / A-11
FORM NO. 56041720 - 7730 - A-11