Hopper Lift Switch - American-Lincoln 56515851 Instrucciones De Uso

A-16 / ENGLISH
CONTROLS

HOPPER LIFT SWITCH

The hopper lift switch (A) is located on the instrument panel as shown in fi gure 22. The switch controls the operation of the hopper lift system. To
raise the hopper for dumping, press and hold the lower half of the switch until the hopper reaches the desired height, then release. To close the
hopper press in and hold the upper half of the switch until the hopper closes completely then release.
WARNING!
To prevent the hopper from closing while doing maintenance lock the hopper in the open position into place with the safety arm.
SIDE BROOM and MAIN BROOM SWITCH
The side broom and main broom switch (B) is located on the instrument panel as shown in fi gure 23. By pressing in the upper half of the switch,
the side and main broom are raised and turned off. To lower and turn on both brooms, press the lower half of the switch.
A-16 - FORM NO. 56041720 - 7730
FIGURE 22
FIGURE 23