American-Lincoln 56515851 Instrucciones De Uso página 24

A-24 / ENGLISH
OPERATING INSTRUCTIONS
THE NON-RECYCLING OR STANDARD SCRUBBING MODE
During the scrubbing process, detergent solution water from the solution tank (A) is fed to the solution line. There it is fed to the fl oor where
three disc scrubbing brushes (B) work to dislodge soil. After scrubbing, the dirty solution is vacuumed from the fl oor by the squeegee (C) and
discharged into the containment chamber in the forward portion of the recovery tank (D), where a system of baffl es helps to clarify the solution.
Sensors in each tank will indicate, by lights on the control panel, when the water in the solution tank is too low or when the water in the recovery
tank is too high.
ESP OPERATING MODE
During the scrubbing process, fi ltered water from the solution tank (A) is fed to the solution line, where it combines with detergent. This mixture
is then fed to the fl oor where two or three disc scrubbing brushes (B) work to dislodge soil. After scrubbing, the dirty solution is vacuumed from
the fl oor by the squeegee (C) and discharged into the recovery tank (D). At intervals, a fl oat switch activates the recycling pump (E), which sends
fi ltered solution from the recovery tank to the solution tank.
A-24 - FORM NO. 56041720 - 7730
FIGURE 39
FIGURE 40