American-Lincoln 56515851 Instrucciones De Uso página 30

A-30 / ENGLISH
OPERATING INSTRUCTIONS
DUST CONTROL KNOB
The dust control knob (A) is used to hold the dust control fi lter cover down as shown in fi gure 57. The dust control fi lter (B) is located under the
front cover and will need to be removed periodically for cleaning or replacement. Removal of the fi lter panel requires no tools. The front cover
must be opened to gain access to the fi lter compartment. The panel fi lter is held in place by a hinged frame and knob. To remove the panel fi lter,
turn the knob counterclockwise and lift the hinged frame. The panel fi lter can now be lifted out and cleaned or replaced. To install the replacement
panel fi lter, place a new fi lter in the machine, lower the frame and twist the knob clockwise to lock the fi lter in place.
HYDRAULIC RESERVOIR FLUID LEVEL SIGHT GAUGE
The fl uid level sight gauge (C) is located on the right side of the machine under the front cover as shown in fi gure 59. The sight gauge is used to
indicate the level of fl uid in the reservoir. The fl uid level must be visible in the sight gauge when the hopper is in the down position.
A-30 - FORM NO. 56041720 - 7730
FIGURE 57
FIGURE 59
FIGURE 58