PerfectBattery BC100, BC200
NOTE
I
Supplementary information for operating the product.
➤ Action: This symbol indicates that action is required on your part. The
required action is described step-by-step.
✓ This symbol describes the result of an action.
fig. 1 5, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
2
Safety instructions
The manufacturer accepts no liability for damage in the following cases:
Damage to the product resulting from mechanical influences and excess
voltage
Alterations to the product without express permission from the manu-
facturer
Use for purposes other than those described in the operating manual
WARNING!
!
Note the following basic safety information when using electrical
devices to protect against:
Electric shock
Fire hazards
Injury
2.1
General safety
DANGER!
D
In the event of fire, use a fire extinguisher which is suitable for
electrical devices.
WARNING!
!
Only use the device as intended.
Ensure that the red and black terminals never come into con-
tact.
EN
Safety instructions
15