Explanation Of Symbols; Safety Instructions; General Safety - Waeco ECL-76 Instrucciones De Montaje

Explanation of symbols

1 Explanation of symbols
WARNING!
!
Safety instruction: Failure to observe this instruction can cause fatal or serious
injury.
CAUTION!
!
Safety instruction: Failure to observe this instruction can lead to injury.
NOTICE!
A
Failure to observe this instruction can cause material damage and impair the
function of the product.
NOTE
I
Supplementary information for operating the product.
➤ Action: This symbol indicates that action is required on your part. The required action
is described step-by-step.
✓
This symbol describes the result of an action.
 BA10: This information refers to another manual included in the scope of delivery
where you can find more details, in this case on the BA10.
fig. 1 5, page 3: This refers to an element in an illustration. In this case, item 5 in
figure 1 on page 3.
2

Safety instructions

The manufacturer accepts no liability for damage in the following cases:
 Damage to the product resulting from mechanical influences and excess voltage
 Alterations to the product without express permission from the manufacturer
 Use for purposes other than those described in the operating manual
2.1

General safety

WARNING!
!
 Always disconnect the power supply when carrying out repairs on the charg-
ing current distributor.
 If a connection cable is damaged, it must be replaced to prevent possible
electrical hazards.
 Do not operate the device if it is visibly damaged.
50
ECL-76, ECL-102
EN