Stroller Assembly; Open Stroller; Assemble Front Wheels; Assemble Rear Wheels - Joie aire twin stroller Manual De Instrucciones

Stroller Assembly

Please read all the instructions in this manual before assembling and using this product.

Open Stroller

see images
1
- 1
Push secondary lock 1 and squeeze one-hand-fold handle
open. Latches should click into place.
!
Check that the stroller is completely latched before continuing to use.

Assemble Front Wheels

see images -
2 3

Assemble Rear Wheels

see images -
4 6
Snap the brake cable into the fixing tabs under the tube.

Secure Footrest

see images
7
Push the footrest down to secure it.

Assemble Hood

see images -
8 9
Snap the 4 hook and loop fasteners on canopy rear retention.

Assemble Armbar

see images -
10 11

Assemble Storage Basket

see images
12

Stroller Operation

Adjust Recline

see images -
14 15

Use Buckle

see images -
16 17
!
To avoid serious injury from falling or sliding out, always secure your child with harness.
!
Make sure your child is snugly secured. The space between the child and the shoulder harness is about the
thickness of one hand.
!
Do not cross the shoulder belts. This will cause pressure on a child's neck.
13
- 2
1 . Meanwhile, pull the stroller backward to
5
9
Use Shoulder & Waist Harnesses
see images -
18 21
!
In order to protect your child from falling out, after your child is placed into the seat, check whether the
shoulder and waist harnesses are at proper height and length.
18
- 1 Shoulder harness anchor A
18 - 2 Shoulder harness anchor B
18
- 3 Slide adjuster
For larger child, use shoulder harness anchor A and the highest shoulder slots.
For smaller child, use shoulder harness anchor B and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the anchor to be level with the side facing forward.
Thread it through the shoulder harness slot from back to front.
child's shoulder height.
20
Use slide adjuster to change the harness length.
21
- 2
Press the button , while pulling the waist harness to proper length
21

Adjust Calf Support

see images -
22 23
The calf support has 2 positions.
To raise the calf support, push it upwards.
To lower calf support, press the adjustment buttons on both sides of the calf support
support downwards. - 2
23

Use Front Swivel Lock

see images
24
Pull up the front swivel locks to maintain the moving direction.
Tip
It is recommended to use swivel locks on uneven surfaces.

Use Brake

see images -
25 26
To lock wheels, step the brake lever downwards. 25
To release wheels, step the brake lever forwards.
Tip
Always set the parking brake when stroller is not moving.
Tip
Clean brake system regularly to ensure fully functional. See care and maintenance section.
Tip
To ensure brake is fully on, gently rock the stroller backwards and forwards before releasing the handle.

Use Hood

see images -
27 28
Roll up the hood's rear panel and then attach the hook and loop fastener, to check on your baby.
19 Rethread it through the slot that is closest to
-1
- 3
21
- 1, and rotate the calf
23
24
26
28
14