Beurer BM 27 Manual De Instrucciones página 21

• If a battery has leaked, put on protective gloves and clean
the battery compartment with a dry cloth.
• Protect batteries from excessive heat.
• Risk of explosion! Never throw batteries into a fire.
• Do not charge or short-circuit batteries.
• If the device is not to be used for a relatively long period,
take the batteries out of the battery compartment.
• Use identical or equivalent battery types only.
• Always replace all batteries at the same time.
• Do not use rechargeable batteries.
• Do not disassemble, split or crush the batteries.
Instructions for repairs and disposal
• Batteries do not belong in household waste. Please dis-
pose of empty batteries at the collection points intended
for this purpose.
• Do not open the device. Failure to comply will result in
voiding of the warranty.
• Do not repair or adjust the device yourself. Proper opera-
tion can no longer be guaranteed in this case.
• Repairs must only be carried out by Customer Services
or authorised suppliers. Before making a claim, please
check the batteries first and replace them if necessary.
• Please dispose of the device in accordance with
EC Directive – WEEE (Waste Electrical and
Electronic Equipment). If you have any questions,
please contact the local authorities responsible for waste
disposal.
Notes on electromagnetic compatibility
• The device is suitable for use in all environments listed
in these instructions for use, including domestic environ-
ments.
• The use of the device may be limited in the presence of
electromagnetic disturbances. This could result in issues
such as error messages or the failure of the display/device.
• Avoid using this device directly next to other devices or
stacked on top of other devices, as this could lead to
faulty operation. If, however, it is necessary to use the de-
vice in the manner stated, this device as well as the other
devices must be monitored to ensure they are working
properly.
• The use of accessories other than those specified or
provided by the manufacturer of this device can lead to
an increase in electromagnetic emissions or a decrease in
the device's electromagnetic immunity; this can result in
faulty operation.
• Failure to comply with the above can impair the perfor-
mance of the device.
21