Evaluating Results - Beurer BM 27 Manual De Instrucciones

• To switch off, press the START/STOP button
forget to turn off the device, it will switch itself off auto-
matically after approx. 3 minutes.
Wait for at least 1 minute before taking another
measurement.

6. Evaluating results

Cardiac arrhythmia:
This device can identify potential disruptions of the heart
rhythm when measuring and if necessary, indicates this
after the measurement with the symbol
indicator for arrhythmia. Arrhythmia is an illness in which the
heart rhythm is abnormal because of flaws in the bioelectri-
cal system that regulates the heartbeat. The symptoms
(skipped or premature heart beats, pulse being slow or too
fast) can be caused by factors such as heart disease, age,
physical make-up, excess stimulants, stress or lack of sleep.
Arrhythmia can only be determined through an examination
by your doctor. If the symbol
after the measurement has been taken, repeat the measure-
ment. Please ensure that you rest for 5 minutes beforehand
and do not speak or move during the measurement. If the
symbol appears frequently, please consult your doctor.
Self-diagnosis and treatment based on the measurements
can be dangerous. Always follow your GP's instructions.
. If you
. This can be an
is shown on the display
Risk indicator:
The measurements can be classified and evaluated in ac-
cordance with the following table.
However, these standard values serve only as a general
guideline, as the individual blood pressure varies in different
people and different age groups etc.
It is important to consult your doctor regularly for advice.
Your doctor will tell you your individual values for normal
blood pressure as well as the value above which your blood
pressure is classified as dangerous.
The bar chart on the display and the scale on the unit show
which category the recorded blood pressure values fall into.
If the values of systole and diastole fall into two different
categories (e.g. systole in the High normal category and
diastole in the Normal category), the graphical classifica-
tion on the device always shows the higher category; for the
example given this would be High normal.
Blood pressure Systole
value category (in mmHg)
Setting 3: severe
≥ 180
hypertension
Setting 2: mode-
160 – 179 100 – 109
rate hypertension
Setting 1: mild
140 – 159 90 – 99
hypertension
26
Diastole
Action
(in mmHg)
seek medical
≥ 110
attention
seek medical
attention
regular monito-
ring by doctor