Noise Pollution; Safety Notes For Rechargeable Battery And Charger; Installation - AL-KO 42.9 Li Traducción Del Manual Original De Instrucciones

GB
■
Take long breaks during your
working day so you can re-
cover from the noise and the
vibrations. Plan your work in
such a way that the use of ap-
pliances that generate strong
vibrations is spread over sev-
eral days.
■
If you notice an unpleasant
sensation or discolouration of
the skin on your hands when
using the tool, stop work im-
mediately. Take sufficient
work breaks. Without suffi-
cient breaks, a hand/arm vi-
bration syndrome can occur.
■
Minimise your risk of being
exposed to vibrations. Main-
tain the tool according to the
instructions in the operating
instructions.
■
If the tool is used frequently,
contact your dealer to pur-
chase anti-vibration accesso-
ries (e.g. handles).
■
Avoid working with the tool at
temperatures below 10 °C.
Define how the vibration load
can be limited in a work plan.

3.3 Noise pollution

A certain level of noise exposure
from this appliance is inevitable.
Carry out noisy work at ap-
proved and specified time peri-
ods. Observe rest periods as
34
necessary and restrict the dura-
tion of the work to a minimum.
For your personal protection and
protection of persons in the vi-
cinity, appropriate hearing pro-
tection must be worn.
3.4 Safety notes for
rechargeable battery and
charger
Heed the safety instructions for
the rechargeable battery and for
the charging unit in the separate
operating instructions.
See:
■
Operating instructions
441630: Li-ion rechargeable
battery B150 Li (B05-3640),
B200 Li (B05-3650)
■
Operating instructions
441633: charger C130 Li
(C05-4230)

4 INSTALLATION

Assembly: see images (02) to (04).
WARNING!
Danger if assembly is not carried out
completely!
Operation of an incompletely assembled
appliance can result in serious injury.
■
Only operate the appliance when it
is fully assembled.
■
Do not insert the battery into the ap-
pliance until it is fully assembled.
■
Check that all safety and protective
devices are in place and functioning
correctly before switching on.
42.9 Li – 42.9 Li SP – 46.9 Li SP
Installation