Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
■
Is the material being cut or processed in
the proper manner?
■
Is the appliance in a proper condition of
use?
■
Is the cutting tool properly sharpened or
is the correct cutting tool installed?
■
Are the handle grips and any optional vi-
bration grips mounted, and are they firm-
ly attached to the appliance?
■
Only operate the tool at the motor speed re-
quired for the respective work. Avoid using
the maximum speed in order to reduce noise
and vibrations.
■
The noise and vibrations of the tool may in-
crease due to improper use and mainte-
nance. This leads to health damage. In this
case, immediately switch off the tool and
have it repaired by an authorised service
workshop.
■
The degree of stress due to vibration de-
pends on the work to be performed or on the
use of the tool. Estimate the stress and plan
appropriate work breaks. This considerably
reduces stress due to vibration over the en-
tire working time.
■
Extensive use of the tool exposes the opera-
tor to vibrations, which can lead to circulatory
issues ("white fingers"). To avoid this risk,
wear gloves and keep your hands warm. If
any symptoms of "white fingers" occur, im-
mediately consult a physician. These symp-
toms include: Numbness, loss of feeling, tin-
gling, itching, pain, reduced muscular
strength, changes in the colour or condition
of the skin. Normally these conditions affect
the fingers, hands or pulse. The risk increas-
es at low temperatures.
■
Take long breaks during your working day so
you can recover from the noise and the vibra-
tions. Plan your work in such a way that the
use of appliances that generate strong vibra-
tions is spread over several days.
■
If you notice an unpleasant sensation or disc-
olouration of the skin on your hands when us-
ing the tool, stop work immediately. Take suf-
ficient work breaks. Without sufficient breaks,
a hand/arm vibration syndrome can occur.
■
Minimise your risk of being exposed to vibra-
tions. Maintain the tool according to the in-
structions in the operating instructions.
443121_a
■
If the tool is used frequently, contact your
dealer to purchase anti-vibration accessories
(e.g. handles).
■
Avoid working with the tool at temperatures
below 10 °C. Define how the vibration load
can be limited in a work plan.
3.3
Noise pollution
A certain level of noise exposure from this appli-
ance is inevitable. Carry out noisy work at ap-
proved and specified time periods. Observe rest
periods as necessary and restrict the duration of
the work to a minimum. For your personal protec-
tion and protection of persons in the vicinity, ap-
propriate hearing protection must be worn.
3.4
Safety notes for rechargeable battery
and charger
Please observe the safety instructions for the re-
chargeable battery and the charger in the sepa-
rate operating instructions.
See:
■
Operating manual 443130: Rechargeable
batteries
■
Operating manual 443131: Chargers
4 INSTALLATION
Assembly: See assembly instructions
WARNING! Danger if assembly is not
carried out completely! Use of an incompletely
assembled appliance can result in serious injury.
■
Operate the appliance only when it is fully as-
sembled!
■
Do not insert the battery into the appliance
until it is fully assembled!
5 START-UP
5.1
Charging the rechargeable batteries (01)
The rechargeable battery and charger are not in-
cluded with every product variant. The following
Li ion rechargeable batteries and chargers from
AL-KO can be used:
Product
Designation
Li-ion re-
B50 Li
chargeable
battery
Li-ion re-
B75 Li
chargeable
battery
Art. No.
113893
113894
23
Publicidad
Tabla de contenido
