Maytag Commercial MLE22PD Instrucciones De Instalación página 24

REVERSING DRYER DOOR SWING (OPTIONAL)
4. Lift the inner door assembly off outer door assembly.
5. Remove four Phillips-head screws to release centre insert from
outer door ring.
6. Lift and rotate centre insert 180 degrees.
7. Reassemble the centre insert and outer door ring with the
four screws.
24
Reverse Hinge
1. Use a small flat-blade screwdriver to remove the two plug strips
from the inner door. Slide the head of the screwdriver under
the plugs, without scratching the inner door surface, and lift
up the strip.
2. Remove the four screws that attach to inner door hinge.
3. Move hinge to other side. Reinstall the four screws.
4. Reinstall plug strips on opposite side of the inner door.
5. Check for fingerprints on the glass. Clean if necessary.