Maytag Commercial MLE22PD Instrucciones De Instalación página 32

ELECTRONIC CONTROL SETUP INSTRUCTIONS
Start Operating Set-up
Washer/dryers are preset at the factory and do not require any
programming. However, if you want to change the settings, follow
the "Set-Up Codes" guide.
The code at the beginning of each segment is the factory default
setting for the PD Models and is the same for the PN Models
unless noted otherwise.
The set-up code is indicated by the one or two left-hand characters.
The set-up code value is indicated by the two or three right-hand
characters.
Set-Up Codes
Code Explanation
6 06 REGULAR PRICE CYCLE (DRYER)
6 06 Represents the number of Coin 3s needed
to start the dryer; may adjust from 0-200
(see b.05 set-up for value of quarters (Coin
1). Advance from 0-200 by pressing HEAVY
DUTY. Factory default of six quarters = $1.50.
6 00 PN Models Only: Factory default of 6 00 or
0 quarters.
CYCLE VEND PRICE (WASHER)
6 07 NORMAL Regular Cycle Vend Price—
NORMAL Represents the number of Coin 1s needed to
start the washer. Increase between 0 and 200
by pressing the POWERWASH button and
decrease by pressing TEMPERATURE button.
Factory preset for seven coins = $1.75.
6 00 PN models only: Factory default of 6 00 or
NORMAL 0 quarters.
6 07 DELICATES Regular Cycle Vend Price—
DELICATE Represents the number of Coin 1s needed to
start the washer. Increase between 0 and 200
by pressing the POWERWASH button and
decrease by pressing the TEMPERATURE
button. Factory preset for seven coins = $1.75.
6 00 PN models only: Factory default of 6 00 or
DELICATE 0 quarters.
6 07 POWERWASH Regular Cycle Vend Price—
POWERWASH Represents the number of Coin 1s needed to
start the washer. Increase between 0 and 200
by pressing the POWERWASH button and
decrease by pressing the TEMPERATURE
button. Factory preset for seven coins = $1.75.
6 00 PN models only: Factory default of 6 00 or
POWERWASH 0 quarters.
Press the EXTRA RINSE button once to
advance to next code.
7 05 REGULAR DRY TIME (DRYER)
7 05 PD Models: Represents the number of minutes
per quarter (Coin 1). Factory default of 5
minutes per coin. Example: Six quarters x 5
minutes = 30 minutes. By pressing the HEAVY
DUTY button, value adjusts from 1-99 minutes.
7 45 PN Models: Represents the cycle length for
free cycles. Example: "7 45" = 45 minutes.
7 11 WASH LENGTH (WASHER)
7 11 This is the number of minutes for wash. Washer
comes from the factory preset with 11 minutes.
Choose from 9-17 minutes by pressing the
POWERWASH button and decrease by
pressing the TEMPERATURE button.
Press the EXTRA RINSE button once to
advance to next code.
32
8 00 TYPE OF DRYER PRICING (DRYER)
8 00 Fixed cycle with top off. For detailed
description, see "General User Information. "
8 FC PN models only: Factory default of FC. Fixed
Cycle. For detailed description, see "General
User Information. " Use DELICATES button to
make this selection.
8 00 ADDITIONAL RINSE OPTION (WASHER)
NOTE: Use this field to exit Service Mode
by pressing the LOWER LEFT key pad when
operating as Free Vend.
8 00 Additional Rinse not selected Off.
Press and hold the TEMPERATURE button to
exit Service Mode.
8 AR Additional Rinse selected, On.
Press the DELICATES button to change
settings between 00 and AR.
Press and hold the TEMPERATURE button to
exit Service Mode.
Press the EXTRA RINSE button once
to advance to next code.
9 00 CYCLE COUNTER OPTION (WASHER)
This option is either selected On or not
selected Off.
9 00 Not selected Off.
9 0C Selected On and not able to be deselected.
Press DELICATES button three consecutive
times to select On. Once On is selected, it
cannot be deselected.
Press the EXTRA RINSE button once
to advance to next code.
1.00 MONEY COUNTER OPTION (WASHER)
This option is either selected On or not
selected Off.
1.00 Not selected Off.
1.0C Selected On.
Press DELICATES button three consecutive
times to select On and three consecutive times
to remove (not selected Off).
Counter resets by going from Off to On.
1.C0 Selected On and not able to be deselected.
To select On and not able to be deselected,
first select On; then within two seconds press
DELICATES twice, POWERWASH once, and
exit the set-up mode.
Press the EXTRA RINSE button once
to advance to next code.
2.00 SPECIAL PRICING OPTION (WASHER)
This option is either selected on or not
selected Off.
2.00 Not selected off.
2.SP Selected on. Press the DELICATES button
once for this selection.
If special pricing option is selected, you have access to codes
"3. " through "9."
NOTE: An external battery needs to be added to keep the clock
running during periods of power outages.
Press the EXTRA RINSE button once
to advance to next code.