Setting The Signal Type - Silvercrest STK 17 A1 Instrucciones De Montaje

light of the signal indicator
6 times to indicate that the synchro-
nization is successful.

Setting the signal type

The receiver can indicate the reception of a
door signal either both optically and
acoustically, acoustically or optically.
Using the signal type selector button
, select whether the signal is to be
4
indicated both optically and acousti-
cally or acoustically or optically.
Press the signal type selector button
once. An acoustical signal will
4
sound up and the afterwards the
signal indicator
receiver will now indicate the door
signal acoustically and optically.
Press again the signal type selector
button
An acoustical signal will sound. The
receiver will now indicate the door
signal acoustically. Press again the
signal type selector button
1
.
4
flickers
1
will flash up. The
4
GB/MT 95
. The