5. Joining Each PVP™ (Creating a Modular Design)
Vertically Joining
the Panels
PVP™ Series User Manual, Rev. 4
PVPs are joined together to create a modular designed video wall. Because the panels
are interchangeable, you can create a video wall by joining several of the same model or
joining different models to create a larger or more complex video wall.
Each PVP™ can be easily joined vertically to a truss using 2 Rig Kits (sold separately)
and the 2 female speego connections located at the top corner of each panel. Use the
male speego connections at the bottom of each panel to connect additional panels.
These connectors stay recessed when not being used.
Clamps must be installed as shown above on a single column installation.
Joining Each PVP™ (Creating a Modular Design)
Speego
11