Important Notice - Chauvet Professional PVP Serie Manual Del Usuario

Joining Each PVP™ (Creating a Modular Design)

Important Notice

12-
Use the following instructions to join panels vertically:
1. Line up the male and female speegos at the top and bottom of each panel.
2. Push male speego connections into female speego connections.
3. Turn the top knob ¼ turn to hold in place.
4. Align panels and twist bottom screw collar clockwise to secure panel in place.
Once the panels are fastened, make sure to twist the bottom collar clockwise to
lock the panels in place.
For PVP™ panels manufactured prior to 2014, the speego is designed to be hand-
tightened only. Using tools may damage the speego and void the panel warranty.
See Important Notice.
Turn ¼ turn to hold panel in place
Twist tight to secure panel
Chauvet Professional has redesigned the speego connectors for all PVP panels
starting in 2014. When assembling the PVP panels with these new speego
connectors, you are able to use a crescent wrench to achieve proper alignment.
Please use caution when using a wrench and only rotate it between a 1/4 and 1
complete clockwise rotation. Do not over-tighten the speego; doing so may cause
damage to the video panel.
PVP™ Series User Manual, Rev. 4