Horizontally Joining Panels - Chauvet Professional PVP Serie Manual Del Usuario

Joining Each PVP™ (Creating a Modular Design)
Horizontally Joining
Each PVP™ can be easily joined horizontally using the 2 horizontal locking knobs on the
inside, left-hand top and bottom of each panel.
Panels
Clamps may be installed as shown below when 2 or more columns are installed.
Use the following instructions to join panels horizontally:
1. Line up the male and female speegos at the top and bottom of each panel.
2. Push male speego connections into female speego connections.
3. Turn the top knob ¼ turn to hold in place.
4. Align panels and twist bottom screw collar clockwise to secure panel in place. In
order to achieve better alignment, it may be necessary to slightly loosen the speego.
Once the panels are fastened, make sure to twist the bottom collar clockwise to
lock the panels in place.
Turn ¼ turn to hold panel in place
Twist tight to secure panel
PVP™ Series User Manual, Rev. 4 13