Chauvet Professional PVP Serie Manual Del Usuario página 27

Connecting (Cabling) Each PVP™
The following diagram shows an example of a signal connection configuration using
more than 24 panels. A video wall design with more than 24 panels requires:
· Incoming signal connection to the VIP™ Driver.
· VIP™ Driver connection to the VIP™ Signal Distributor.
· Signal cable connections as determined by the number of panels in the video wall
design and the desired layout, for ease of setup.
Every group of 24 panels will require another signal cable from the VIP™ Signal
Distributor. Eight signal cables can be connected to a single VIP™ Signal
Distributor.
DVI-D
Up to 24 Panels
VIP™ Driver
etherCON®
etherCON®
VIP™ Signal
Distributor
Up to 24 Panels
Signal Jumper Cable
In this configuration, the backup from the driver may be connected to the last
panel in any group of panels, or to any free connection to the VIP™ Signal
Distributor, including input "B."
PVP™ Series User Manual, Rev. 4 17