Bresser NATIONAL GEOGRAPHIC 9070200 Instrucciones De Uso página 21

C. On the display appear the maximum values
since the last reset.
D. Press and hold the MIN/MAX- button to delete
the maximum values of the currently selected
channel.
E. Press this button again
F. MIN appears on the display
G. On the display appear the minimum values
since the last reset.
H. Press and hold the MIN/MAX- button to delete
the minimum values of the currently selected
channel.
I. Press again to go back to the display of the
present values.
NOTE: press and hold the MIN/MAX /- or
CHANNEL / + button for a fast running.
SETTING OF THE ALARM FOR THE
TEMPERATURE AND HUMIDITY
1. Temperature alarm
(1) press the CHANNEL /+ button until the
arrow appears on the desired channel
(channel 1-3, IN)
(2) Press and hold ALARM / SET button for 3
seconds.
(3) HI AL and upper temperature limit (CH 1-3:
70°C - default, IN: 60°C) starts flashing on
the display.
(4) Press the CHANNEL /+ or MIN/MAX /- but-
ton to adjust the desired upper temperature
limit.
NOTE: press and hold the MIN/MAX /- or
CHANNEL / + button for a fast running.
(5) press and hold the ALARM / SET button
after setting the value when still flashing to
activate the alarm function.
(6) The alarm symbol (A10) appears on the
display
EN
21