Bresser NATIONAL GEOGRAPHIC 9070200 Instrucciones De Uso página 23

(10) Save the setting with the ALARM / SET
button.
DISPLAY OF ADJUSTED ALARM VALUES
1. Press the ALARM /SET button in normal mode
to show the adjusted upper alarm limits
2. Press again the ALARM / SET button in normal
mode to show the adjusted lower alarm limits
3. Press again this button to return to normal
display
DEACTIVATING /ACTIVATING THE ALARM
(1) Press the CHANNEL / + button until the arrow
appears on the desired channel.
(2) Press and hold ALARM / SET button for 3
seconds.
(3) Upper Temperature Alert limit starts flashing
on the display
(4) In Temperature and Humidity Alarm Mode,
each press of ALARM / SET button rotates
between:
• Upper Temperature Alert
• Lower Temperature Alert
• Upper Humidity Alert
• Lower Humidity Alert
(5) When the above alerts are displayed, pressing
ALARM/SET button for 3 seconds will deacti-
vate/activate the corresponding alert.
(6) The alarm symbol (A10) disappears/appears
on the display.
(7) Save the setting with the ALARM / SET button.
DISABLING WHEN ALARMS ARE ACTIVATED
Press ALARM/SET button to stop the alarm
sound. HI AL or LO AL still flashing on the display.
EN
23