Scope Of Delivery; Main Unit - Bresser NATIONAL GEOGRAPHIC 9070200 Instrucciones De Uso

ATTENTION!
The manufacturer is not liable for damage
related to improperly installed batteries!

SCOPE OF DELIVERY

Main unit (A), Remote sensor (B), Instruction
manual
Required batteries (not included with purchase):
3x AAA / LR03 (1.5V) for Main Unit
6x AAA / LR03 (1.5V) for Outdoor Sensors
INSTALLATION OF MAIN UNIT
1. Open the battery compartment of the main
unit and insert three new batteries 1,5V AAA,
polarity as illustrated.
2. ALL LCD segments will be displayed for about
a few seconds.
3. Close the battery compartment.
INSTALLATION OF OUTDOOR SENSOR
1. Open the battery compartment of the
outdoor sensor with a screwdriver.
2. Insert two new batteries 1,5 AAA, the display
shows the temperature and humidity and the
Channel number 1.
3. Press the °C and °F switch (D6) to select
temperature unit.
4. Use the Channel switch (D7) to change
between Channel 1, Channel 2 or Channel 3.
There are a total of 3 outdoor sensors, set all
3 to different channels.

MAIN UNIT

1. The measurements of the installed outdoor
sensors will be transmitted to the main unit
and the radio-controlled reception symbol (A1)
appears.
2. If the reception is successful, the display will
show temperature and humidity of the respec-
tive outdoor sensor, the temperature trend
EN
19