Adjusting The Magnification; Adjusting The Display Brightness - Eschenbach Smartlux Digital Manual De Instrucciones

Adjusting the Magnification

The smartlux DIGITAL can provide 4 magnification levels during contact operation: 5×, 7×, 9× and 12×. The available
magnification is lower when the device is being held in the hand. If you raise the smartlux DIGITAL 5 cm from the subject,
the resulting magnification levels are approximately 1.9×, 2.6×, 3.4× und 4.5×.
In the writing position:
If you press the magnification button (e) briefly, the next highest magnification will be set. The magnification currently
set will be displayed at the top screen border for 5 seconds.

Adjusting the display brightness

If the display appears to be too bright, you can dim the brightness. To do this, press and hold the magnification button
(e) down. The display will dim to 75% after 3 seconds, and then to a brightness of 50% after a further 3 seconds, before
it repeats the cycle from 100% brightness. To save the setting, simply release the magnification button at the display
brightness which appears comfortable to you. The brightness currently set will be displayed at the top screen border for 5
seconds.
100% display brightness 75% display brightness 50% display brightness
- 24 -