Operating The Light - Jandy Pro Serie Manual Del Propietário

Nicheless Underwater LED Lights | Owner's Manual
4.2

Operating the Light

3. To change the color mode, turn the light OFF for one 1-3 seconds.
Continue turning OFF and ON until the desired light color mode is
reached. See Table 1 for the color mode sequence.
Example: If you followed step 3 and are now on Sky Blue and want the lights to
be Violet, then the lights must be turned off and on 7 seven times to bring you to
Violet.
Sequence Order
Table 1. Color Mode Sequence
4. The lights have memory. If the lights are off for 7 seconds or more,
the next time the lights are turned on, they will return to the last color
mode they were on prior to being turned off (Step 1 listed above). This
function allows you to keep your lights returning to your favorite color
mode every time the lights are turned back on.
NOTE To synchronize colors on multiple Jandy
Underwater LED Light systems wired to separate switches,
perform the above actions on all of their switches simultaneously.
All Jandy Pro Series Nicheless Underwater LED Lights will
synchronize automatically if activated by the same switch. No
other accessories are required.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
ENGLISH
Color Modes
Alpine White
Sky Blue
Cobalt Blue
Caribbean Blue
Spring Green
Emerald Green
Emerald Rose
Magenta
Violet
Slow Color Splash
Fast Color Splash
America the Beautiful
Fat Tuesday
Disco Tech
Pro Series Nicheless
®
Page 11