Wiring To A Switch; Twelve (12) Volt Installation - Jandy Pro Serie Manual Del Propietário

Nicheless Underwater LED Lights | Owner's Manual
RISK OF ELECTRICAL SHOCK OR ELECTROCUTION,
which could result in serious injury or death.
Series Nicheless LED Lights are only available for 12-volt AC power.
For supply connection, use only an isolating low voltage power
supply with ungrounded output, evaluated and listed by a NRTL for
swimming pool use.
3.3

Wiring to a Switch

The Jandy Pro Series Nicheless LED Lights can be wired to a switch to
®
manually operate the lights. Refer to Figure 4 to connect the lights into the
switch.
Line
Neutral
Ground
Figure 4. Wiring Jandy Pro Series Nicheless Underwater Lights
3.4

Twelve (12) Volt Installation

A 12-14 Volt AC Transformer must be used to power all 12-Volt lights.
NOTE For optimum performance Jandy Pro Series recommends not
exceeding the load factor specified by the instructions included with
the transformer.
To ensure maximum safety, use only a Class 2 transformer that can supply
12-14 Volts AC to power all 12-Volt lights. The transformer must be listed
or certified by a Nationally Recognized Testing Laboratory (NRTL) for the
intended use.
WARNING
AquaLink
Relay or Switch
Black
White
GFCI*
Ground
*
If required by transformer manufacturer's instructions
or by local code and AHJ requirements.
ENGLISH
The Jandy Pro
Aux
®
Black
120 volts to
White
12VAC
Green
Transformer
Page 9