WEPA Topitec Touch Manual De Uso página 17

The built-in safety devices must be regularly checked and tested as described in the table below.
= annually
Table 1 Test intervals for safety systems
The moment the main switch is actuated, the
®
TOPITEC TOUCH is connected to or disconnected
from the power mains. The main switch is located
Before carrying out cleaning, maintenance or
repair work, switch off the main switch and also
disconnect the power cord from the mains socket.
®
The TOPITEC TOUCH is internally wired to a
single-phase, 3-wire supply adapter, with separate
protective earth (PE) conductor (green/yellow).
The earthing of the electrically conductive components of
®
the TOPITEC TOUCH must be checked at regular intervals.
The device operator must ensure that unauthorised persons (i.e. persons who
are not authorised to operate or service the device) cannot access the device.
= visual inspection
F = function test
M = measurement
Interval
Interval
Interval
Method
F
Method
Method