WEPA Topitec Touch Manual De Uso página 65

the [ ] icon is displayed in the footer of the touch screen.
Press the [ ] button. The system indicates that the memory
module has been correctly connected: message [
] is displayed. Press the [ ] button.
Then press the [
do so by pressing [ YES ]. The data is automatically transferred to
the memory module. The progress bar in the right section of the
touch screen indicates the progress of the data transfer.
displayed again. Press the [ ] button to return to the
start menu.
leave it connected to the device. In this case, you can back up
the [ ] whenever you wish to do so, or restore
®
them from the memory module to the TOPITEC TOUCH when
the need arises.
To disconnect the memory module safely:
®
Switch off the TOPITEC TOUCH with the main switch at the rear
of the device. Disconnect the memory module from the port.
The system can now be restarted for production, etc.