WEPA Topitec Touch Manual De Uso página 34

The TOPITEC
who have been properly instructed in its operation. The TOPITEC
Before starting production, ensure that
(e.g. tools, residual material, etc.) near the TOPITEC
Main switch
(power switch)
Fuse holder
(recessed)
Power cable socket
(3-pin)
(power switch)
When this switch is ON, the TOPITEC
If the main switch needs to be switched off for
cleaning, maintenance or repair work, always disconnect
the power cable from the power socket (to prevent inadvertent switching on).
with phases and PE conductor; socket for conventional IEC-60320 C13/C14 cable plug.
The power cable must be connected to a properly earthed power socket with PE conductor.
Interface of TOPITEC
The USB port allows you to connect device to a PC, so that you can run the TOPITEC
TOUCH operating manual | 05-2013
®
TOUCH must be operated by trained operating personnel
Fig. 6-1 Power connection, interfaces
®
®
TOUCH is powered from the power mains.
® TOUCH for data memory or technician device.
®
TOUCH
®
Technician / memory module
interface (Sub-D 15, male adapter)
Printer interface
(RS 232, serial port)
PC interface (USB)
.
®
DokuManager.