WEPA Topitec Touch Manual De Uso página 32

Remove all packaging and protective material and position the TOPITEC
top (see chapter 5.3.1.1). The TOPITEC
When choosing the location of installation, observe the information below.
®
The TOPITEC
handling hazardous substances, always strictly adhere to the relevant safety instructions. For more
The power cable socket of the TOPITEC
Compare the mains voltage with the rated voltage of the system (220/230 V).
The mains plug should always be easily accessible.
Fig. 5-4 Commissioning (page 32)
32
TOUCH operating manual | 05-2013
®
®
TOUCH is located at the rear of the device.
Before connecting the plug to the mains socket,
ensure that the mains switch is set to "0" (OFF).
®
Switch on the TOPITEC
The device must subsequently be operated
Do not apply any force to the touch screen surface.
If the touch screen buttons are touched by hand or another
implement, the screen might become dirty or damaged.
tant reminder. Touch the screen with the touch pen to close the
TOUCH by setting the mains switch to "I".
®
TOUCH on the work
-