WEPA Topitec Touch Manual De Uso página 61

For the documentation of your formulations and production runs, we recommend connecting
Fig. 8-1 Connection of documentation printer (pages 61-62)
tion and printing. The baud rate must be set to 9600. For detailed
instructions, please refer to the user manual of the printer.
Connecting the printer
Connect the printer power cable to a socket. The printer is
automatically switched on. The display shows the time and
the activated numerator (NUM). Deactivate the numerator
by pressing the [N/N] button.
Connect the serial cable (prod. no. 25 663) to the serial
Connect the other end of the cable to the printer port
(RS 232, serial) at the rear of the TOPITEC
®
TOUCH system.
®
TOUCH.
-