Medela BabyWeigh II Manual De Instrucciones página 22

Instructions for Weighing (cont.)
Instructions for Weighing
Setup:
1. Attach the tray and level the scale prior to weighing
2. Press the
display If using a blanket or pad on the scale, press
tare/zero
button to zero out the excess weight Net
be indicated
Before-feed Weight (pre-weight):
1. Place baby on the scale,
holding one hand just
above baby Wait until the
display indicates
lock (Beep sound) The
value that appears is the
pre-weight
1
2. Press the
store the pre-weight
3. Remove baby from the
scale, place baby in a safe
location and then record
pre-weight
Feed baby Leave scale on
during feeding
After-feed Weight (post-weight):
NOTE: Ensure the display has reset to '0'. If it has not, press
the button to zero out the display.
1. If the scale has powered off, press the
until a '0' appears in the display The pre-weight is saved in
memory, even if the scale is powered off
21
button and wait until a '0' appears in the
button to
will
button and wait