Scale Settings Adjustment                  26 - Medela BabyWeigh II Manual De Instrucciones

Scale Settings Adjustment
To adjust settings for Display Hold Time and Auto Power Off
Time complete the following steps:
Enter the setting menu by pressing
the key
(Beep sound)
3
Press button while the screen
is flashing (Beep sound) The LCD
screen will show SEt
Depending on which setting you wish to adjust follow next
steps under instructions for each setting
Display Hold Time
The "Display Hold Time" setting holds the display for a
specified length of time This setting determines how long
the weight displays after the baby has been removed from
the scale It also controls the length of time the weight is
displayed when recalling pre-feed, post-feed and amount fed
values
1. Press tare/zero key
(Beep sound)
The hold time is shown (the default is 10 seconds), and the
value is changed by pressing this key
* The hold times that can be set are 5 seconds, 10 seconds, 20 seconds or 30 seconds
26