Foppapedretti CARILLON Manual De Instrucciones página 20

R
Q
K
5. Fix the backrest fabric onto the steel wire with
the buttons.
click
6A. Fix the rigid crotch strap (R), onto the tray (Q)
with the screws.
click
click
Q
6B. Install the font tray (Q) into the holes until a
"click".
click
click
7. Assemble the bouncer frame by insert the rear
connect tube ( L) into the two seat tubes (K). When
L
the components are assembled correctly, the metal
pins will slot into the holes on the fixture tubes. At
click
this point you will hear them click into place.
K
8. Install the seat unit onto the bouncer frame. When
click
the components are assembled correctly, the metal
pins will slot into the holes on the fixture tubes. At
this point you will hear them click into place.
click
Carillon - 20 EN