Technical Data - EINHELL TC-PN 50 Manual De Instrucciones Original

The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Remember.
Too small a diameter of the hose and too
long a hose line will result in loss of power.

4. Technical data

Max. permissible working pressure ......... 8.3 bar
Recommended pressure range ............... 6.3 bar
Air consumption .................... approx. 0.66 l/shot
Staple width ............................................ 5.7 mm
Staple length ......................................13 - 40 mm
Nail length ..........................................10 - 50 mm
Recommended hose diameter ................Ø 9 mm
Weight ........................................... approx. 1.5 kg
Sound and vibration
Sound and vibration values were measured in ac-
cordance with EN 12549 and EN ISO 4871.
L sound pressure level ..................... 106 dB(A)
pC
K uncertainty .......................................... 2.5 dB
pA
L sound power level ....................... 99.7 dB(A)
WA
K uncertainty .......................................... 2.5 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) were determined in accordance with ISO
8662-11-1999 and EN 12096.
Vibration emission value a
K uncertainty = 1.5 m/s
These values for noise emissions are equipment-
based characteristic values and do not refl ect the
noise generated at the place of use. The noise
generated at the place of use will depend, for
example, on the work area, the workpiece, work-
Anl_TC_PN_50_SPK9.indb 16 Anl_TC_PN_50_SPK9.indb 16
GB
piece support and the number of stapling/nailing
operations.
The value given for vibration is an equipment-
based characteristic value and does not repre-
sent the impact on the hand and arm system
when the equipment is used. The impact on the
hand and arm system when the equipment is
used will depend, for example, on the force of the
grip, the pressing force, the direction in which you
are working, the air pressure setting, the workpie-
ce and the workpiece support.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
= 3.9 m/s
2
h
2
- 16 -
06.03.2019 10:14:21 06.03.2019 10:14:21