Technical Data Romax Compact; Technical Data Battery / Charger; Function Of The Unit; Changing The Battery (A) - Rothenberger ROMAX Compact Instrucciones De Uso

Ocultar thumbs Ver también para ROMAX Compact:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
2

Technical data ROMAX Compact

Battery voltage .....................................................................
Battery capacity. ..................................................................
Rated power consumption ...................................................
Motor speed. ........................................................................
Maximum piston force ..........................................................
Pressing time (according to nominal size) ............................
Dimensions (L x W x H) .......................................................
Weight (without battery) .......................................................
Working range. ....................................................................
Application temperature range .............................................
Operating mode ...................................................................
Typical acceleration in hand-arm area .................................
Sound pressure level (L
Sound power level (L
The noise level during operation can exceed 85 dB (A). Wear ear protection!
Measurements found in compliance with EN 60745-1.
2.1

Technical data battery / charger

Battery, art.-no.:
Typ/ model ...................................... Lithium-Ion
Voltage ........................................... 14,4 V DC
Capacity ......................................... 2,6 Ah
Max. discharging temperature. ........ -20°C +60°C
Approx. charging time (90% full) ..... ca. 70 min
Weight ............................................ ca. 470 g
Recharge battery pack before first use!
Deep discharge protection may influence empty
battery detection of the machine!
3

Function of the Unit

3.1
Changing the battery
Insert battery until the catch clicks into place. (LED flashes briefly = Contact made). To remove
press the catch and take out the battery.
If the battery voltage is lower than necessary, the LED flashes red. Charge the battery in
the charger.
) ...................................................
pA
) ......................................................
WA
15418
Battery
ENGLISH
14,4 V
2,6 Ah
280 W
12000 1/min
19kN
ca. 6-9 s
380 x 70 x 90 mm
ca. 2,0 kg
Ø 12 – 40 mm (system- dependent)
-10 – 60°C / 14 – 140°F
S3
≤ 2,5 m/s2
71 dB (A) ¦ K
pA
82 dB (A) ¦ K
WA
Charger, art. no.:
Typ/ model ........................................
Input voltage .....................................
Input capacity ....................................
Input frequency .................................
Input power .......................................
Charging voltage ...............................
Max. charge current ..........................
Rated output .....................................
Number of battery cells .....................
Weight ..............................................
Pay attention to the electrical outlet
voltage! Check the label on the bottom
of the charger.
3 dB (A)
3 dB (A)
EU 15017,
AUS 1500000230,
US 1000001827
Charger for 14,4V
Li-Ion Akku
220-240 V AC
110V AC
0,4 - 0,8 A max.
50 – 60 Hz
70 W max.
7,2 - 18 V DC
3 A max.
54 W max.
8
ca. 450 g
(A)
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

015020p

Tabla de contenido