2
Technical Data
Battery:
U = Voltage
C = Capacity
W = Weight
Ic = Charge current
t
= Approx. charging time (90% full)
Charging voltage ............................ 20,75 V DC
Charging temperature ..................... 0° - 50° C
Max. discharging temperature. ....... 5° - 50° C
Recharge battery pack before first use!
3
Function of the Unit
3.1
Overview
Battery pack
1
Sliding seat
2
Operation display
3
3.2
Start of operation
Before plugging in, check to see that the rated mains voltage and mains fre-
quency, as specified on the rating label, match your power supply.
Devices such as this one, which generate direct current, may have an effect on basic residual-
current circuit breakers. Use type F or better, with a release current of max. 30 mA.
Before commissioning the charger, ensure that the air slots are free. Minimum
distance to other objects is 5 cm.
Self-test:
Insert mains supply plug.
The warning display (4) and the operating indicator (3) light up one after the other for approx. 1
second and the installed fan runs for approx. 5 seconds.
Battery pack:
Charge the battery pack before use (1).
If performance diminishes, recharge the battery pack.
The ideal storage temperature is between 10° C and 30° C. The permissible storage temperature
is between 0° C and 50° C.
"Li-Power" li-ion battery packs have a capacity and signal indicator: (6)
Press the button (5), the LEDs indicate the charge level.
If one LED is flashing, the battery pack is almost flat and must be recharged.
3.3
Handling
Charging battery pack:
Push the battery pack completely to the stop on the sliding seat (2).
The operating indicator (3) flashes.
Charger:
U1 = Input voltage
f1 = Input frequency
P1 = Input power
U2 = Charging voltage
I2 = Max. charge current
Nc = No. of battery cells
W = Weight
Pay attention to the electrical outlet
voltage! Check the label on the bottom
of the charger!
Warning display
4
Capacity indicator button
5
Capacity and signal indicator
6
ENGLISH
(A)
(A)
13