en
Operation
Position
Drive
1
6
2
6
3
5
8
4
6
* Insert / remove whisk, stirrer or kneading
hook. Add large quantities of ingredients.
Operation
W Risk of injury!
Do not insert mains plug until all preparations
for working with the appliance are complete.
Attention!
Do not operate the appliance without an
accessory/tool in the operating position. Do
not operate the appliance empty. Do not
expose appliance or accessories to heat
sources. Parts are not microwavesafe.
■ Before operating the appliance and
accessories for the first time, clean
thoroughly; see "Cleaning and servicing".
20
Important information
MUM50..
These operating instructions contain a sticker
with reference values for the operating speed
14
of the appliance when using the tools or
accessories. We recommend attaching this
sticker to the appliance (Fig. C).
14
Preparation
■ Place the base unit on a smooth, clean
12
■ Pull out the power cord (Fig. D).
*
–
Warning!
Do not twist the cord when inserting it.
24
■ Insert the mains plug.
Bowl and tools
23
W Risk of injury from the rotating tools
While the appliance is operating, never
place fingers in the mixing bowl. Attach the
34
cover (11) before operating the appliance!
Do not change tools until the drive has
come to a standstill – when the appliance
34
is switched off, the drive continues running
briefly and stops in the tool change position.
Do not move the swivel arm until the tool
has come to a standstill.
Always secure unused drives with
protective drive covers.
Attention!
Use bowl with this appliance only.
Stirrer (12)
for stirring dough, e.g. cake mixture
Whisk (13)
for whisking egg whites, cream and
light dough, e.g. sponge mixture
Kneading hook (14)
for kneading heavy dough and
mixing in ingredients that ought not
be cut (e.g. raisins and chocolate
chips)
surface.
Cord store:
Pull out cable to the required
length.