Before Using The Appliance; Fitting Continuous Feed Shred- Der Onto The Base Unit; Assembling The Continuous Feed Shredder; Basic Operation - Bosch MUZS24DSW Instrucciones De Uso

disc holder is available from cus-
tomer service under order number
00630760.

Before using the appliance

Before using the appli-
ance
Prepare the base unit and the ac-
Before using the appliance
cessories for use.
Overview of base units
You can prepare your kitchen ma-
chine as shown.
→ Fig.
3
Food processor from the MUM5 series
A
Food processor from the MUMS2
B
series
Assembling the continuous
feed shredder
Grip the disc holder level with the
1.
wings.
→ Fig.
4
The two plastic tips must point up.
Take hold of the required cutting
2.
disc by the edge and fit onto the
disc holder with the side you re-
quire facing up.
Fit single-sided discs with the
‒
blades or serrations facing up.
Fit reversible discs with the re-
‒
quired marking facing up.
→ Fig.
5
Insert the disc holder with the cut-
3.
ting disc into the housing.
→ Fig.
6
Place the lid on the housing.
4.
→ Fig.
7
Markings and
up.
must match
Before using the appliance en
Rotate the lid clockwise until it en-
5.
gages.
→ Fig.
8
Markings and
up.
Fitting continuous feed shred-
der onto the base unit
Place the continuous feed shred-
1.
der on drive 2 as shown.
→ Fig.
9
Push the continuous feed shredder
2.
down and rotate clockwise until it
engages.
→ Fig.
10
The continuous feed shredder
must be securely connected to the
base unit.

Basic operation

Basic operation
You can find out everything you need
Basic operation
to know about operating your ac-
cessory here.
Processing food with the con-
tinuous feed shredder
Note: Take note of the recommended
speeds.
→ "Application examples", Page 21
Tip: For optimum results, process
thin ingredients in bunches.
Prepare your food.
1.
Cut large items of food into pieces
so they fit into the filling shaft.
Insert the mains plug.
2.
→ Fig.
11
Set the rotary switch to the recom-
3.
mended speed.
→ Fig.
12
must match
19