IWC Schaffhausen INGENIEUR CHRONOGRAPH EDITION “TRIBUTE TO NICO ROSBERG” Instrucciones De Manejo página 27

— 2 7 —
W I N D I N G P O S I T I O N
With the crown in the winding position (0), you can also wind the
automatic movement by hand. A few revolutions of the crown are
enough to start the movement. However, it is better to wind the
watch by turning the crown through approximately 20 revolutions
as this will ensure maximum accuracy.
D AT E S E T T I N G
If a month has fewer than 31 days, you will need to set the date
manually to the first day of the following month. Release the
screw­in crown and pull it out to position 1. You can now set
the date by turning the crown to the right (rapid adjustment).
You should not use the rapid-adjustment function between
8 p.m. and 2 a.m. because the movement auto matically
advances the date during this period and the change mech-
anism could be damaged.
I N G E N I E U R C H R O N O G R A P H